- 油基鑽井液産品
- 水基鑽井液産品
- 固井産品
- 堵漏産品
- 其他産品
産品中心
HarCOAT油基輔乳化劑 Oil-based Secondary Emulsifier
簡介Introduction
HarCOAT是一款高性價比油基鑽井液輔乳化劑,專為成本敏感工況設計。通過優化協同效應增強主乳化×劑性能,有效提升乳液穩定性與抗溫和抗污染能力,顯著降低HTHP濾失。在保障基礎流變和井壁穩定的(de)同時,大幅降低鑽井液綜合成本,重複利用效率高,适用于淺中層井及批量化作業場景。
HarCOAT is a cost-effective oil-based drilling fluid secondary emulsifier, specifically desφigned for cost-sensitive operating conditions. It enhances the performan§ce of the primary emulsifier through optimized synergistic effects, effect>ively improving emulsion stability, temperature resistance, and contaminatio•n resistance while significantly reducing high-temperature high-pressure (HTHP) fluid$ loss. While ensuring fundamental rheological properties and wellbore stability, this solution s↔ignificantly reduces overall drilling fluid costs with high' reusability efficiency, making it particularly suitable for shallow-to-medium depth wells a₽nd batch operation scenarios.
性能及優點Performance and Advantages
l 推薦加量:0.8%~1.2%;
l 與主乳化劑協同增效,顯著提升乳化穩定性和耐溫抗污染性能;
l 精準調控高溫高壓濾失量,在低成本條件下保持優異井壁封固效果;
l 平衡流變調控與成本,避免性能冗餘;
l 有效降低綜合成本,為淺中層油氣井及批量化作業提供高性≈價比解決方案。
l Recommended dosage: 0.8% to 1.2%;
l Synergistic effect with primary emulsifier: Significantly enhances emulsion st'ability, temperature resistance;
l Precise control of HTHP fluid loss: Maintains excellent wellbore stabilization under low-cost condi↑tions;
l Balanced rheology control and cost: Avoids performance redundancy;
l Effectively reduces overall costs: Provides cost-effective solutions for medium-s"hallow oil/gas wells and batch operations.
技術參數Technical Parameters
項目Item | 技術指标Technical Index | |
外觀Appearance | 可流動液體flowable liquid | |
密度Density(20°C)/(g/cm³) | 0.90-1.00 | |
傾點Pour Point/(℃) | ≤-10 | |
pH | 5.0-8.0 | |
乳化率Emulsification Rate/(%) | 熱滾前Before Hot Rolling | ≥90.0 |
熱滾後After Hot Rolling | ≥90.0 | |
破乳電壓Emulsion Breaking Voltage/(50℃,V) | 熱滾前Before Hot Rolling | ≥500 |
熱滾後After Hot Rolling | ≥500 | |
包裝Packaging
采用鍍鋅桶或塑料桶包裝,包裝牢固、密封良好,可根據用戶需求提≠供200L、50L兩種分裝規格。
The product is packaged in galvanized or plastic drums that are securely sealed. It is avai₽lable in 200L and 50L sizes, packaged according to customer requiremen₽ts.
上一條:HarMUL 油基主乳化劑 HarMUL Oil...
下一條:RheMUL 低粘度主乳化劑 Low-visc...